removing floating oil pac 30% for water treatment chemicals

pac - shandong bairun chemical co.,ltd


Poly Aluminium Chloride mainly used for the purification of drinking water and water supply special water treatment, such as iron, fluoride, cadmium removal, in addition to radioactive contamination, in addition to the floating oil etc.In addition, also used for precision casting, medicine, paper making, rubber, leather, oil, chemical, dyes.

Contact Suppliers
poly aluminium chloride (pac) - water treatment chemical

Poly Aluminium Chloride (PAC) - Water Treatment Chemical

Poly aluminium chloride (PAC) , the white or yellow powder, is an inorganic polymer coagulant. Compared with traditional inorganic coagulants, fengbai poly aluminum chloride flocculation precipitation speed is fast, the PH value applicable range is wide, water purification effect is obvious and non-corrosive to pipeline equipment.

Contact Suppliers
using polyaluminium coagulants in water treatment


At one water treatment plant in the Otway region of Victoria, polyaluminium chloride replaced alum and in so doing SO 4 levels in the treated water were reduced from 27 to 4 - 5 mg/L. Previously, alum was dosed at 45 to 55 mg/L at this plant.

Contact Suppliers
polyaluminium chloride pac 30% water treatment chemical for sale

Polyaluminium Chloride PAC 30% Water Treatment Chemical for Sale

There are four types of polyaluminium chloride for sale with different content of AL2O3 and basicity. Among them, PAC 30% 01&02 is used for drinking water treatment, while PAC 30% 03&PAC 28% 04 is used for industrial wastewater treatment. The four types can be easily distinguished by color, from white, light-yellow to deep-yellow.

Contact Suppliers
snack food plant uses mobile oil skimmer to remove oil from

Snack Food Plant Uses Mobile Oil Skimmer to Remove Oil from

When it comes to removing oil from water for recovery, reuse or recycling, trust the experts at Oil Skimmers, Inc. Over the years, we’ve collected dozens of typical problems encountered in waste oil, tramp oil and sludge recovery, and now we’ve assembled them into one publication.

Contact Suppliers
oil and grease removal from industrial wastewater using new

Oil and Grease Removal from Industrial Wastewater Using New

The present study is an attempt to investigate oil and grease pollution that may pollute fresh water and influence aquatic environment. Then removal of oil and grease from manufacturing wastewater befall essential but common techniques not enough. Enzyme and adsorption units representing major developed new laboratory were selected to assess the water quality and humiliation prospective of oil

Contact Suppliers
caustic soda pearls/flakes - water treatment chemicals

Caustic Soda Pearls/Flakes - Water Treatment Chemicals

Caustic soda is widely used as water treatment chemical. In wastewater treatment plants, sodium hydroxide can reduce the hardness of water through a neutralization reaction. In the industrial field, it is a regeneration agent for the regeneration of ion exchange resins. Sodium hydroxide is strongly alkaline and has relatively high solubility in

Contact Suppliers